Jewellery Sizing Instructions

Ring

How to Determine Your Ring Size

1. Use a flexible measuring tape or cut a thin strip of paper or string.

2. Wrap around your finger. Make sure to measure below the joint of your finger and close to your knuckle. If you have larger joints, please take that into account.

3. Mark the spot where the paper or string meets and measure the distance with your ruler.

4. Use the following measurements to determine your size. Rings also come in half sizes if your measurement is between two sizes.

Size 2 - 41.7mm (1.64")

Size 3 - 44.2mm (1.74")

Size 4 - 46.8mm (1.84")

Size 5 - 49.3mm (1.94")

Size 6 - 51.9mm (2.04")

Size 7 - 54.4mm (2.14")

Size 8 - 57.0mm (2.24")

Size 9 - 59.5mm (2.34")

Size 10 - 62.1mm (2.44")

Size 11 - 64.6mm (2.54")

Size 12 - 67.2mm (2.65")

Size 13 - 69.7mm (2.75")

Size 14 - 72.3mm (2.85")

Size 15 - 74.8mm (2.95")

Size 16 - 77.4mm (3.05")

Palm Bracelet

How to Measure for a Palm Bracelet

1. Use a flexible measuring tape or cut a thin strip of paper or string.

2. Wrap around your hand (palm) above the thumb, making sure this measurement is snug but still allowing comfortable movement. We will add wiggle room to your palm bracelet. 

3. Mark the spot where the paper or string meets and measure with your ruler.

4. Use the following measurements to determine your size. If you are outside of the regular range please message via Etsy to create a custom order. 

Bangle

How to Measure for a Circular Bangle

1. Use a flexible measuring tape or cut a thin strip of paper or string.
2. Close your fingers together, bring your thumb and little finger together, tucking your thumb into your little finger (as though putting on a bangle).
3. Measure around your closed hand at the widest point, pulling the tape snug against the skin. Mark the overlap with a pen, then measure with a ruler.  
4. Use the following measurements to determine your bangle size. If you are outside of these ranges, please send a message via Etsy to create a custom listing. 
 

2-3/8 inches - Small

2-5/8 inches - Medium 
8-5/8 inches - Large

Cuff

How to Measure for a Cuff Bracelet

1. Use a measuring tape or cut a thin strip of paper or string.
2. Wrap the paper around your wrist where you would like your cuff to sit. 
3. Mark the overlap with a pen, then measure with a ruler.  
4. This measurement will be your cuff size.

Bracelet

How to Measure for a Stretch Bracelet

1. Use a measuring tape or cut a thin strip of paper or string.

2. Wrap the paper or string around your wrist where you would like your cuff to sit. 

3. Mark the overlap with a pen, then measure with a ruler.  

4. This measure will be your wrist size. See the following suggestions to determine your bracelet size. 

Snug Fit - Add 1/4 inches to 1/2 inches
Comfortable Fit - Add 3/4 inches to 1 inch
Loose Fit - Add 1-1/4 inches

Anklet

How to Measure for an Anklet

1. Use a measuring tape or cut a thin strip of paper or string.

2. Wrap the paper around your ankle where you would like your anklet to sit. 

3. Mark the overlap with a pen, then measure with a ruler.  

4. Add 1/2 inch or 1 inch depending if you would like a snug or looser fit. 

Please reload

  • Instagram - Grey Circle
  • Facebook - Grey Circle
  • Twitter - Grey Circle
  • Pinterest - Grey Circle
  • LinkedIn - Grey Circle